Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic Surgery
Jong Woo Choi, Namkug Kim
Arch Plast Surg. 2015;42(3):267-277. Published online 2015 May 14 DOI: https://doi.org/10.5999/aps.2015.42.3.267
|
Citations to this article as recorded by
The Use and Outcomes of 3D Printing in Pediatric Craniofacial Surgery: A Systematic Review
Devin J. Clegg, Andrew J. Deek, Caleb Blackburn, Christopher A. Scott, Justin R. Daggett
Journal of Craniofacial Surgery.2024;[Epub] CrossRef The performance tests of three-dimensional printing titanium alloy craniomaxillofacial bone plate: A preliminary preclinical study
Hongpu Wei, Xiaochen Xue, Jingshuang Yu, Tengfei Jiang, Xiang Li, Kaili Lin, Lei Zhang, Xudong Wang
Journal of Dental Sciences.2023; 18(4): 1756. CrossRef Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Zhaojun Jia, Xiaoxue Xu, Donghui Zhu, Yufeng Zheng
Progress in Materials Science.2023; 134: 101072. CrossRef 3D bioprinting of emulating homeostasis regulation for regenerative medicine applications
Zhen Wang, Lei Xiang, Feng Lin, Yunkai Tang, Wenguo Cui
Journal of Controlled Release.2023; 353: 147. CrossRef Design and 3D printing of a modular phantom of a uterus for medical device validation
Sara Candidori, Serena Graziosi, Paola Russo, Kasra Osouli, Francesco De Gaetano, Alberto Antonio Zanini, Maria Laura Costantino
Rapid Prototyping Journal.2023; 29(11): 7. CrossRef Two-Dimensional Post-Traumatic Measurements of Orbital Floor Blowout Fractures Underestimate Defect Sizes Compared to Three-Dimensional Approaches
Juergen Taxis, Lena Ungerboeck, Mika R. Gehrking, Constantin Motel, Matthias Wurm, Alexander W. Eckert, Gerrit Spanier, Felix Nieberle, Natascha Platz Batista da Silva, Nils Ludwig, Johannes K. Meier, Tobias Ettl, Torsten E. Reichert, Steffen Spoerl
Tomography.2023; 9(2): 579. CrossRef Investigation on Filaments for 3D Printing of Nasal Septum Cartilage Implant
Przemysław Gnatowski, Karolina Gwizdała, Agnieszka Kurdyn, Andrzej Skorek, Ewa Augustin, Justyna Kucińska-Lipka
Materials.2023; 16(9): 3534. CrossRef Three‐dimensional printing in oral and maxillofacial surgery: Current landscape and future directions
Mustafa Mian, Seth Delpachitra, David Ackland, Sarah Fink, Nathan Wang, George Dimitroulis
Oral Surgery.2022; 15(3): 431. CrossRef Assessment of an Artificial Intelligence Mandibular Osteotomy Design System: A Retrospective Study
Xiaohui Qiu, Wenqing Han, Lu Dai, Yan Zhang, Jie Zhang, Gang Chai, Li Lin, Jianda Zhou
Aesthetic Plastic Surgery.2022; 46(3): 1303. CrossRef Complications arising from clinical application of composite polycaprolactone/bioactive glass ceramic implants for craniofacial reconstruction: A prospective study
Young Chul Kim, In Ah Yoon, Soo Hyun Woo, Dong Ryul Song, Ki Young Kim, Seon Jeong Kim, Woo Shik Jeong, Jong Woo Choi
Journal of Cranio-Maxillofacial Surgery.2022; 50(12): 863. CrossRef The corrugator supercilii for craniofacial reconstruction: a systematic review
Mark Watke
European Journal of Plastic Surgery.2022; 46(3): 327. CrossRef Accuracy of the Application of 3-Dimensional Printing Models in Orbital Blowout Fractures—A Preliminary Study
Chun-Yu Ma, Tien-Hsiang Wang, Wen-Chan Yu, Yu-Chung Shih, Chih-Hsun Lin, Cherng-Kang Perng, Hsu Ma, Shyh-Jen Wang, Wei-Ming Chen, Ching-En Chen
Annals of Plastic Surgery.2022; 88(1s): S33. CrossRef The Need for Innovation in Rhinoplasty
Andrew A. Winkler, Carolyn Chabuz, Cameron N. D. McIntosh, Garyfalia Lekakis
Facial Plastic Surgery.2022; 38(05): 440. CrossRef Mandibular Reconstruction With the Contralateral Vascularized Iliac Flap Using Individual Design: Iliac Crest Used to Reconstruct the Ramus and the Anterior Border of the Iliac Wing Used to Reconstruct the Inferior Border: A Case Report
Guangcai Xu, Ju Jia, Xuepeng Xiong, Liwei Peng, Lin-lin Bu, Xiqian Wang
Frontiers in Surgery.2022;[Epub] CrossRef Optical scan and 3D printing guided radiation therapy – an application and provincial experience in cutaneous nasal carcinoma
Jui Chih Cheng, Arbind Dubey, James Beck, David Sasaki, Ahmet Leylek, Shrinivas Rathod
3D Printing in Medicine.2022;[Epub] CrossRef Many Moving Pieces: Virtual Preoperative Surgical Planning for Traumatic Occlusal Splints
Joshua Yoon, Isabelle Lock, Caleb K. Fan, Uma Maduekwe, Michael Ha, Yvonne Rasko, Michael P. Grant, Arthur J. Nam, Jordan P. Steinberg, Fan Liang
Journal of Craniofacial Surgery.2022; 33(4): 1037. CrossRef Nasoethmoid orbital fracture reconstruction using a three-dimensional printing-based craniofacial plate
Hyun Ki Hong, Do Gon Kim, Dong Hun Choi, Anna Seo, Ho Yun Chung
Archives of Craniofacial Surgery.2022; 23(6): 278. CrossRef Tribo-corrosive behavior of additive manufactured parts for orthopaedic applications
Abrar Malik, Saquib Rouf, Mir Irfan Ul Haq, Ankush Raina, Ana Pilar Valerga Puerta, Binnur Sagbas, Alessandro Ruggiero
Journal of Orthopaedics.2022; 34: 49. CrossRef Anatomical Engineering and 3D Printing for Surgery and Medical Devices: International Review and Future Exponential Innovations
José Cornejo, Jorge A. Cornejo-Aguilar, Mariela Vargas, Carlos G. Helguero, Rafhael Milanezi de Andrade, Sebastian Torres-Montoya, Javier Asensio-Salazar, Alvaro Rivero Calle, Jaime Martínez Santos, Aaron Damon, Alfredo Quiñones-Hinojosa, Miguel D. Quinte
BioMed Research International.2022; 2022: 1. CrossRef Implementation of 3D Printing and Computer-Aided Design and Manufacturing (CAD/CAM) in Craniofacial Reconstruction
Kaleem S. Ahmed, Hamza Ibad, Zafar A. Suchal, Arun K. Gosain
Journal of Craniofacial Surgery.2022; 33(6): 1714. CrossRef Evolution of midface microvascular reconstruction: three decades of experience from a single institution
Uglešić Vedran, Amin Kavit, Blivajs Igor, Košutić Damir
European Archives of Oto-Rhino-Laryngology.2022; 279(8): 4173. CrossRef The Comparison of Clinical Efficacy of Minimally Invasive Tarsal Sinus Approach and L-Type Incision Approach Combined with 3D Printing Technology in Calcaneal Fracture
Hao Du, Shiang Li, Shicheng Tu, Kun Wang, Zhiyu Fang, Ahmed Faeq Hussein
Computational and Mathematical Methods in Medicine.2022; 2022: 1. CrossRef 3D printing in pharmaceuticals: An emerging technology full of challenges
K. Wadher, R. Trivedi, N. Wankhede, M. Kale, M. Umekar
Annales Pharmaceutiques Françaises.2021; 79(2): 107. CrossRef Three-dimensional (3D) synthetic printing for the manufacture of non-biodegradable models, tools and implants used in surgery: a review of current methods
Benjamin Kirby, Jeffrey M. Kenkel, Andrew Y. Zhang, Bardia Amirlak, Thomas M. Suszynski
Journal of Medical Engineering & Technology.2021; 45(1): 14. CrossRef Application of Three-Dimensional Imaging in Asian Rhinoplasty with Costal Cartilage
Wenbo Li, Ying Liang, Yang Sun, Xiang Xiong, Xianxi Meng, Zhongjie Yi, Xiancheng Wang
Aesthetic Plastic Surgery.2021; 45(4): 1714. CrossRef The effect of three-dimensional (3D) printing on quantitative and qualitative outcomes in paediatric orthopaedic osteotomies: a systematic review
Mohsen Raza, Daniel Murphy, Yael Gelfer
EFORT Open Reviews.2021; 6(2): 130. CrossRef Customized Surgical Protocols for Guided Bone Regeneration Using 3D Printing Technology: A Retrospective Clinical Trial
Paloma Manzano Romero, Valentino Vellone, Francesco Maffia, Giuseppe Cicero
Journal of Craniofacial Surgery.2021; 32(2): e198. CrossRef Multiscale sterilizable 3D printed auricular templates to guide cartilaginous framework sizing and sculpture during autologous microtia reconstruction
Bushra Alhazmi, Feras Alshomer, Bassam Alawirdhi
JPRAS Open.2021; 28: 121. CrossRef Three-dimensional Printing in Plastic Surgery: Current Applications, Future Directions, and Ethical Implications
Alex Q. Lynn, Lacey R. Pflibsen, Anthony A. Smith, Alanna M. Rebecca, Chad M. Teven
Plastic and Reconstructive Surgery - Global Open.2021; 9(3): e3465. CrossRef Method, Material, and Machine: A Review for the Surgeon Using Three-Dimensional Printing for Accelerated Device Production
Helen Xun, Scott Clarke, Nusaiba Baker, Christopher Shallal, Erica Lee, Darya Fadavi, Alison Wong, Gerald Brandacher, Sung Hoon Kang, Justin M. Sacks
Journal of the American College of Surgeons.2021; 232(5): 726. CrossRef Osteogenesis of 3D-Printed PCL/TCP/bdECM Scaffold Using Adipose-Derived Stem Cells Aggregates; An Experimental Study in the Canine Mandible
Joon Seok Lee, Tae Hyun Park, Jeong Yeop Ryu, Dong Kyu Kim, Eun Jung Oh, Hyun Mi Kim, Jin-Hyung Shim, Won-Soo Yun, Jung Bo Huh, Sung Hwan Moon, Seong Soo Kang, Ho Yun Chung
International Journal of Molecular Sciences.2021; 22(11): 5409. CrossRef Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Julián I. Aguilar-Duque, Cesar O. Balderrama-Armendáriz, Cesar A. Puente-Montejano, Arturo S. Ontiveros-Zepeda, Jorge L. García-Alcaraz
The International Journal of Advanced Manufacturing Technology.2021; 115(11-12): 3965. CrossRef 3D printing in biomedical engineering: Processes, materials, and applications
Jiahui Lai, Chong Wang, Min Wang
Applied Physics Reviews.2021;[Epub] CrossRef The application of additive manufacturing / 3D printing in ergonomic aspects of product design: A systematic review
Tjaša Kermavnar, Alice Shannon, Leonard W. O'Sullivan
Applied Ergonomics.2021; 97: 103528. CrossRef Manufacturing Capability of Three-Dimensional Printed Stereolithography Parts for Impact Applications
Anne Schmitz
Journal of Engineering and Science in Medical Diagnostics and Therapy.2021;[Epub] CrossRef Benefits and Biosafety of Use of 3D-Printing Technology for Titanium Biomedical Implants: A Pilot Study in the Rabbit Model
Sabrina Livia Ng, Subhabrata Das, Yen-Peng Ting, Raymond Chung Wen Wong, Nattharee Chanchareonsook
International Journal of Molecular Sciences.2021; 22(16): 8480. CrossRef Role of three-dimensional printing in neurosurgery: An institutional experience
Ankit Chaudhary, Sanjeev Chopra, Virendra Sinha
Asian Journal of Neurosurgery.2021; 16(03): 531. CrossRef Application of multimedia technology in water conservancy and hydropower engineering
Jingfeng Zhao, Jing Zhang
Journal of Visual Communication and Image Representation.2020; 71: 102707. CrossRef Layer-by-Layer Printing of Photopolymers in 3D: How Weak is the Interface?
H. Gojzewski, Z. Guo, W. Grzelachowska, M. G. Ridwan, M. A. Hempenius, D. W. Grijpma, G. J. Vancso
ACS Applied Materials & Interfaces.2020; 12(7): 8908. CrossRef Comparison of Three-Dimensional Printing and Computer-aided Engineering in Presurgical Volumetric Assessment of Bilateral Alveolar Clefts
Shuxiu Chen, Bing Liu, Jing Liu, Ningbei Yin, Yongqian Wang
Journal of Craniofacial Surgery.2020; 31(2): 412. CrossRef Aplicaciones de la impresión 3D en cirugía plástica reconstructiva
José Eduardo Telich-Tarriba, Lino Enrique Ramírez-Sosa, Damian Palafox, Esteban Ortega-Hernández, Marco Aurelio Rendón-Medina
Revista de la Facultad de Medicina.2020;[Epub] CrossRef Bright Green Emitting CaYAlO4:Tb3+,Ce3+ Phosphor: Energy Transfer and 3D‐Printing Artwork
Lei Zhou, Junyu Hong, Xiaohui Li, Jianxin Shi, Peter A. Tanner, Ka‐Leung Wong, Mingmei Wu
Advanced Optical Materials.2020;[Epub] CrossRef Three-Dimensional diagnosis in orbital reconstructive surgery
ChingizR Rahimov, SirajaddinG Ahmadov, MasumaCh Rahimli, IsmayilM Farzaliyev
Annals of Maxillofacial Surgery.2020; 10(1): 3. CrossRef 3D printing in tissue engineering: a state of the art review of technologies and biomaterials
Nataraj Poomathi, Sunpreet Singh, Chander Prakash, Arjun Subramanian, Rahul Sahay, Amutha Cinappan, Seeram Ramakrishna
Rapid Prototyping Journal.2020; 26(7): 1313. CrossRef Geometric considerations for the 3D printing of components using fused filament fabrication
Julián Israel Aguilar-Duque, Jorge Luis García-Alcaraz, Juan Luis Hernández-Arellano
The International Journal of Advanced Manufacturing Technology.2020; 109(1-2): 171. CrossRef Laser sterilization of hydroxyapatite implants as an alternative to using radioactive facility
Kyeonghwan Jeong, Kyong Jin Jung, Jaeseop Bae, Jooseong Kim, Jeongmin Seo, Chul Hyun Park, Sukyoung Kim, In Hwan Song
Optik.2020; 218: 165200. CrossRef Staged reconstruction of a chronically infected large skull defect using free tissue transfer and a patient-specific polyetheretherketone implant
Seung Jin Moon, Hong Bae Jeon, Eui Hyun Kim, Dae Hyun Lew, Yong Oock Kim, Jong Won Hong
Archives of Craniofacial Surgery.2020; 21(5): 309. CrossRef Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine
Justin J. Chung, Heejung Im, Soo Hyun Kim, Jong Woong Park, Youngmee Jung
Frontiers in Bioengineering and Biotechnology.2020;[Epub] CrossRef 3D Printed Biomimetic Rabbit Airway Simulation Model for Nasotracheal Intubation Training
Gunpreet Oberoi, M. C. Eberspächer-Schweda, Sepideh Hatamikia, Markus Königshofer, Doris Baumgartner, Anne-Margarethe Kramer, Peter Schaffarich, Hermann Agis, Francesco Moscato, Ewald Unger
Frontiers in Veterinary Science.2020;[Epub] CrossRef Simulation Surgery Using 3D 3-layer Models for Congenital Anomaly
Koichi Ueda, Hiromi Kino, Misato Katayama, Yuka Hirota
Plastic and Reconstructive Surgery - Global Open.2020; 8(8): e3072. CrossRef Using Intraoral Scanning Technology for Three‐Dimensional Printing of Kennedy Class I Removable Partial Denture Metal Framework: A Clinical Report
Feng Hu, Zhenhua Pei, Ying Wen
Journal of Prosthodontics.2019;[Epub] CrossRef Three-Dimensional Printing for Craniofacial Surgery: A Single Institution’s 5-Year Experience
Blaike M. Dumas, Ana Nava, Huay-Zong Law, James Smartt, Christopher Derderian, James R. Seaward, Alex A. Kane, Rami R. Hallac
The Cleft Palate-Craniofacial Journal.2019; 56(6): 729. CrossRef Parametric Design Optimisation of Proximal Humerus Plates Based on Finite Element Method
Ali Jabran, Chris Peach, Zhenmin Zou, Lei Ren
Annals of Biomedical Engineering.2019; 47(2): 601. CrossRef The potential of the three-dimensional printed titanium mesh implant for cranioplasty surgery applications: Biomechanical behaviors and surface properties
Min-Tsan Huang, Po-Kai Juan, Shyuan-Yow Chen, Chia-Jen Wu, Shih-Cheng Wen, Yung-Chieh Cho, Mao-Suan Huang, Hsin-Hua Chou, Keng-Liang Ou
Materials Science and Engineering: C.2019; 97: 412. CrossRef Clinical applications of three‐dimensional printing in otolaryngology–head and neck surgery: A systematic review
Chris J. Hong, Andreas A. Giannopoulos, Brian Y. Hong, Ian J. Witterick, Jonathan C. Irish, John Lee, Allan Vescan, Dimitrios Mitsouras, Wilfred Dang, Paolo Campisi, John R. de Almeida, Eric Monteiro
The Laryngoscope.2019; 129(9): 2045. CrossRef Effects of number of metal restorations and mandibular position during computed tomography imaging on accuracy of maxillofacial models
Yumi Tsuchida, Hidekazu Takahashi, Hiroshi Watanabe, Meiko Oki, Maho Shiozawa, Tohru Kurabayashi, Tetsuya Suzuki
Journal of Prosthodontic Research.2019; 63(2): 239. CrossRef Patient-specific, printed titanium implants for reconstruction of mandibular continuity defects: A systematic review of the evidence
Alexander MC. Goodson, Madhav A. Kittur, Peter L. Evans, E. Mark Williams
Journal of Cranio-Maxillofacial Surgery.2019; 47(6): 968. CrossRef A Review of Three-Dimensional Printing Technology for Medical Applications
Sangwook Lee, Taehun Kim, Dayeong Hong, Junhyeok Ock, Jaeyoung Kwon, Eunseo Gwon, Jinhee Kwon, Joon Beom Seo, Eun Jin Chae, Dong Hyun Yang, Choung-Soo Kim, Yoon Soo Kyung, Beom Seok Ko, Sehoon Choi, Ho-Seok Sa, Namkug Kim
Journal of the Korean Society of Radiology.2019; 80(2): 213. CrossRef 3-DIEPrinting: 3D-printed Models to Assist the Intramuscular Dissection in Abdominally Based Microsurgical Breast Reconstruction
Eric M. Jablonka, Robin T. Wu, Paul A. Mittermiller, Kyle Gifford, Arash Momeni
Plastic and Reconstructive Surgery - Global Open.2019; 7(4): e2222. CrossRef The Use of a Three-Dimensional Printed Model for Surgical Excision of a Vascular Lesion in the Head and Neck
Marek A. Paul, Jakub Opyrchał, Jan Witowski, Ahmed M.S. Ibrahim, Michał Knakiewicz, Paweł Jaremków
Journal of Craniofacial Surgery.2019; 30(6): e566. CrossRef Low-Cost Desktop-Based Three-Dimensional-Printed Patient-Specific Craniofacial Models in Surgical Counseling, Consent Taking, and Education of Parent of Craniosynostosis Patients: A Comparison With Conventional Visual Explanation Modalities
Feras Alshomer, Faisal AlFaqeeh, Mohammed Alariefy, Ikhlass Altweijri, Taghreed Alhumsi
Journal of Craniofacial Surgery.2019; 30(6): 1652. CrossRef Temporal Hollowing Augmentation With Polyetheretherketone Patient-Specific Implant
GyeongHyeon Doh, SuRak Eo, Ki Yong Hong
Journal of Craniofacial Surgery.2019; 30(7): 2131. CrossRef Rheological approach for an additive manufacturing printer based on material extrusion
Larissa Cristina Sanchez, Cesar Augusto Gonçalves Beatrice, Cybele Lotti, Juliano Marini, Sílvia Helena Prado Bettini, Lidiane Cristina Costa
The International Journal of Advanced Manufacturing Technology.2019; 105(5-6): 2403. CrossRef Developing a 3D composite training model for cranial remodeling
Du Cheng, Melissa Yuan, Imali Perera, Ashley O’Connor, Alexander I. Evins, Thomas Imahiyerobo, Mark Souweidane, Caitlin Hoffman
Journal of Neurosurgery: Pediatrics.2019; 24(6): 632. CrossRef Computer-Assisted Planning and 3D Printing-Assisted Modeling for Chin Augmentation
Po-Chuan Chang
Aesthetic Surgery Journal.2018; 38(1): 1. CrossRef Design of Complete Dentures by Adopting CAD Developed for Fixed Prostheses
Yanfeng Li, Weili Han, Jing Cao, Yuan Iv, Yue Zhang, Yishi Han, Yi Shen, Zheng Ma, Huanyue Liu
Journal of Prosthodontics.2018; 27(2): 212. CrossRef The 3D Printing of the Paralyzed Vocal Fold: Added Value in Injection Laryngoplasty
Abdul-Latif Hamdan, Ghassan Haddad, Ali Haydar, Ramsey Hamade
Journal of Voice.2018; 32(4): 499. CrossRef An ad hoc three dimensionally printed tool facilitates intraesophageal suturing in experimental surgery
Daniel C. Steinemann, Philip C. Müller, Martin Apitz, Felix Nickel, Hannes G. Kenngott, Beat P. Müller-Stich, Georg R. Linke
Journal of Surgical Research.2018; 223: 87. CrossRef Three-Dimensional, Computer-Assisted, Three-Layer Models of the Face
Koichi Ueda, Yuka Hirota, Daisuke Mitsuno, Yuki Otsuki, Takashi Nuri
Plastic & Reconstructive Surgery.2018; 141(1): 199e. CrossRef Usefulness of the 3D virtual visualization surgical planning simulation and 3D model for endoscopic endonasal transsphenoidal surgery of pituitary adenoma: Technical report and review of literature
Aya Shinomiya, Atsushi Shindo, Masahiko Kawanishi, Keisuke Miyake, Takehiro Nakamura, Shuji Matsubara, Takashi Tamiya
Interdisciplinary Neurosurgery.2018; 13: 13. CrossRef Low-cost optical scanner and 3-dimensional printing technology to create lead shielding for radiation therapy of facial skin cancer: First clinical case series
Ankur Sharma, David Sasaki, Daniel W. Rickey, Ahmet Leylek, Chad Harris, Kate Johnson, Jorge E. Alpuche Aviles, Boyd McCurdy, Andy Egtberts, Rashmi Koul, Arbind Dubey
Advances in Radiation Oncology.2018; 3(3): 288. CrossRef Additive Manufacturing Technology for Biomedical Components: A review
Haizum Aimi Zaharin, Ahmad Majdi Abdul Rani, Turnad Lenggo Ginta, Farooq I Azam
IOP Conference Series: Materials Science and Engineering.2018; 328: 012003. CrossRef Does intraoperative navigation improve the accuracy of mandibular angle osteotomy: Comparison between augmented reality navigation, individualised templates and free-hand techniques
Ming Zhu, Fei Liu, Chaozheng Zhou, Li Lin, Yan Zhang, Gang Chai, Le Xie, Fazhi Qi, Qingfeng Li
Journal of Plastic, Reconstructive & Aesthetic Surgery.2018; 71(8): 1188. CrossRef Three-Dimensional Printing in Rhinoplasty
Thomas M. Suszynski, Jose Maria Serra, Jason M. Weissler, Bardia Amirlak
Plastic & Reconstructive Surgery.2018; 141(6): 1383. CrossRef The Influence of Selective Laser Melting (SLM) Process Parameters on In-Vitro Cell Response
Bartłomiej Wysocki, Joanna Idaszek, Joanna Zdunek, Krzysztof Rożniatowski, Marcin Pisarek, Akiko Yamamoto, Wojciech Święszkowski
International Journal of Molecular Sciences.2018; 19(6): 1619. CrossRef 3D printing for electroanalysis: From multiuse electrochemical cells to sensors
Rafael M. Cardoso, Dianderson M.H. Mendonça, Weberson P. Silva, Murilo N.T. Silva, Edson Nossol, Rodrigo A.B. da Silva, Eduardo M. Richter, Rodrigo A.A. Muñoz
Analytica Chimica Acta.2018; 1033: 49. CrossRef Cleft Alveolus Reconstruction Using a Three-Dimensional Printed Bioresorbable Scaffold With Human Bone Marrow Cells
Geunseon Ahn, Jeong-Seok Lee, Won-Soo Yun, Jin-Hyung Shim, Ui-Lyong Lee
Journal of Craniofacial Surgery.2018; 29(7): 1880. CrossRef New fabrication method of silk fibroin plate and screw based on a centrifugal casting technique
Dong-Kyu Kim, Jung Min Lee, Ju Yeon Jeong, Hyun Jung Park, Ok Joo Lee, Janet Chao, Soon Hee Kim, Hae Sang Park, Gilson Khang, Chan Hum Park
Journal of Tissue Engineering and Regenerative Medicine.2018; 12(11): 2221. CrossRef Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios
Leonid Chepelev, Nicole Wake, Justin Ryan, Waleed Althobaity, Ashish Gupta, Elsa Arribas, Lumarie Santiago, David H Ballard, Kenneth C Wang, William Weadock, Ciprian N Ionita, Dimitrios Mitsouras, Jonathan Morris, Jane Matsumoto, Andy Christensen, Peter L
3D Printing in Medicine.2018;[Epub] CrossRef 3D Printing—Encompassing the Facets of Dentistry
Gunpreet Oberoi, Sophie Nitsch, Michael Edelmayer, Klara Janjić, Anna Sonja Müller, Hermann Agis
Frontiers in Bioengineering and Biotechnology.2018;[Epub] CrossRef Delayed reconstruction of posttraumatic facial deformities
Yong Ha Kim
Journal of the Korean Medical Association.2018; 61(12): 740. CrossRef The technique for 3D printing patient-specific models for auricular reconstruction
Roberto L. Flores, Hannah Liss, Samuel Raffaelli, Aiza Humayun, Kimberly S. Khouri, Paulo G. Coelho, Lukasz Witek
Journal of Cranio-Maxillofacial Surgery.2017; 45(6): 937. CrossRef Three-dimensional measurement of periodontal surface area for quantifying inflammatory burden
Sa-Beom Park, So-Youn An, Won-Jeong Han, Jong-Tae Park
Journal of Periodontal & Implant Science.2017; 47(3): 154. CrossRef An Overview of Biomaterials in Periodontology and Implant Dentistry
Young-Dan Cho, Yang-Jo Seol, Yong-Moo Lee, In-Chul Rhyu, Hyun-Mo Ryoo, Young Ku
Advances in Materials Science and Engineering.2017; 2017: 1. CrossRef Use of 3D printer technology to facilitate surgical correction of a complex vascular anomaly with esophageal entrapment in a dog
A. Dundie, G. Hayes, P. Scrivani, L. Campoy, D. Fletcher, K. Ash, E. Oxford, N.S. Moïse
Journal of Veterinary Cardiology.2017; 19(2): 196. CrossRef Comparison of endocranial morphology according to age in one-piece fronto-orbital advancement using a distraction in craniosynostotic plagiocephaly
Woo Shik Jeong, Ersin Altun, Jong Woo Choi, Young Shin Rah
Journal of Cranio-Maxillofacial Surgery.2017; 45(9): 1394. CrossRef Ostéotomies fibulaires et mandibulaires en marche d’escalier. Comment réaliser ses propres guides de coupe pour les reconstructions maxillofaciales ?
K. Rem, R. Bosc, H. De Kermadec, B. Hersant, J.-P. Meningaud
Annales de Chirurgie Plastique Esthétique.2017; 62(6): 652. CrossRef Standardized Protocol for Virtual Surgical Plan and 3-Dimensional Surgical Template–Assisted Single-Stage Mandible Contour Surgery
Xi Fu, Jia Qiao, Sabine Girod, Feng Niu, Jian feng Liu, Gordon K. Lee, Lai Gui
Annals of Plastic Surgery.2017; 79(3): 236. CrossRef Osteogenesis of Adipose-Derived and Bone Marrow Stem Cells with Polycaprolactone/Tricalcium Phosphate and Three-Dimensional Printing Technology in a Dog Model of Maxillary Bone Defects
Jeong Lee, Seung Chu, Hak Kim, Kang Choi, Eun Oh, Jin-Hyung Shim, Won-Soo Yun, Jung Huh, Sung Moon, Seong Kang, Ho Chung
Polymers.2017; 9(12): 450. CrossRef The manufacturing of TiAl6V4 implants using selective laser melting technology
P A Lykov, R M Baitimerov, A V Panfilov, A O Guz
IOP Conference Series: Materials Science and Engineering.2017; 248: 012004. CrossRef Three-Dimensional Computer-Assisted Two-Layer Elastic Models of the Face
Koichi Ueda, Yuka Shigemura, Yuki Otsuki, Asuka Fuse, Daisuke Mitsuno
Plastic & Reconstructive Surgery.2017; 140(5): 983. CrossRef New virtual tool for accurate evaluation of facial volume
Rodrigo de Faria Valle Dornelles, Nivaldo Alonso
Acta Cirurgica Brasileira.2017; 32(12): 1075. CrossRef Three-Dimensional Printing: Custom-Made Implants for Craniomaxillofacial Reconstructive Surgery
Mariana Matias, Horácio Zenha, Horácio Costa
Craniomaxillofacial Trauma & Reconstruction.2017; 10(2): 089. CrossRef Current Trends in 3D Printing, Bioprosthetics, and Tissue Engineering in Plastic and Reconstructive Surgery
Cesar Colasante, Zachary Sanford, Evan Garfein, Oren Tepper
Current Surgery Reports.2016;[Epub] CrossRef Changing Paradigms in Cranio-Facial Regeneration: Current and New Strategies for the Activation of Endogenous Stem Cells
Luigi Mele, Pietro Paolo Vitiello, Virginia Tirino, Francesca Paino, Alfredo De Rosa, Davide Liccardo, Gianpaolo Papaccio, Vincenzo Desiderio
Frontiers in Physiology.2016;[Epub] CrossRef Long-term follow-up of one-piece fronto-orbital advancement with distraction but without a bandeau for coronal craniosynostosis: Review of 26 consecutive cases
Woo Shik Jeong, Jong Woo Choi, Tae Suk Oh, Kyung S. Koh, Young Hyun Cho, Seok Ho Hong, Young Shin Rah
Journal of Cranio-Maxillofacial Surgery.2016; 44(9): 1252. CrossRef Application of Rapid Prototyping Technique and Intraoperative Navigation System for the Repair and Reconstruction of Orbital Wall Fractures
Jong Hyun Cha, Yong Hae Lee, Wan Chul Ruy, Young Roe, Myung Ho Moon, Sung Gyun Jung
Archives of Craniofacial Surgery.2016; 17(3): 146. CrossRef Fabrication of three-dimensional scan-to-print ear model for microtia reconstruction
Byoungjun Jeon, Chiwon Lee, Myungjoon Kim, Tae Hyun Choi, Sungwan Kim, Sukwha Kim
Journal of Surgical Research.2016; 206(2): 490. CrossRef Three-dimensional models: an emerging investigational revolution for craniovertebral junction surgery
Atul Goel, Bhavin Jankharia, Abhidha Shah, Prashant Sathe
Journal of Neurosurgery: Spine.2016; 25(6): 740. CrossRef Clinical implementation of 3D printing in the construction of patient specific bolus for electron beam radiotherapy for non-melanoma skin cancer
Richard A. Canters, Irene M. Lips, Markus Wendling, Martijn Kusters, Marianne van Zeeland, Rianne M. Gerritsen, Philip Poortmans, Cornelia G. Verhoef
Radiotherapy and Oncology.2016; 121(1): 148. CrossRef Discussion: Cephalometric Angular Measurements of the Mandible Using Three-Dimensional Computed Tomography Scans in Koreans
Kang Young Choi, Nak Heon Kang
Archives of Plastic Surgery.2016; 43(01): 38. CrossRef Three dimensional printing: A review on the utility within medicine and otolaryngology
Rachel Kaye, Todd Goldstein, David Zeltsman, Daniel A. Grande, Lee P. Smith
International Journal of Pediatric Otorhinolaryngology.2016; 89: 145. CrossRef Practical application of 3D printer models for the medical field by multi-material ink-jet rapid prototyping methods
Iryou kikigaku (The Japanese journal of medical instrumentation).2016; 86(3): 288. CrossRef Cephalometric Angular Measurements of the Mandible Using Three-Dimensional Computed Tomography Scans in Koreans
Yong Hyun Kim, Seok Joo Kang, Hook Sun
Archives of Plastic Surgery.2016; 43(1): 32. CrossRef 3D printing in neonatal care
Roberto Aufieri, Simonetta Picone, Maurizio Gente, Piermichele Paolillo
Italian Journal of Pediatrics.2015;[Epub] CrossRef
|